Protek Srs Drill Interrupter | Learn About The Protek Ii Tool Interrupter 154 개의 새로운 답변이 업데이트되었습니다.

당신은 주제를 찾고 있습니까 “protek srs drill interrupter – Learn About the Protek II Tool Interrupter“? 다음 카테고리의 웹사이트 https://ppa.charoenmotorcycles.com 에서 귀하의 모든 질문에 답변해 드립니다: https://ppa.charoenmotorcycles.com/blog. 바로 아래에서 답을 찾을 수 있습니다. 작성자 Andrew Greess 이(가) 작성한 기사에는 조회수 1,092회 및 좋아요 5개 개의 좋아요가 있습니다.

protek srs drill interrupter 주제에 대한 동영상 보기

여기에서 이 주제에 대한 비디오를 시청하십시오. 주의 깊게 살펴보고 읽고 있는 내용에 대한 피드백을 제공하세요!

d여기에서 Learn About the Protek II Tool Interrupter – protek srs drill interrupter 주제에 대한 세부정보를 참조하세요

\”The Protek Tool Interrupter is the best way for termite professionals to drill safely. This product has sensors that will ensure you don’t drill through any copper or other grounded metal pipes. For this and more helpful products visit QSpray.com.
Protek II Tool Interrupter: bit.ly/2pxs6bk\”

protek srs drill interrupter 주제에 대한 자세한 내용은 여기를 참조하세요.

Protek SRS – Drill Interrupters – Lorien

The rugged PROTEK SRS Drill Interrupter offers excellent protection against drilling through grounded metal piping, grounded conduit, grounded post-tension …

+ 여기에 더 보기

Source: lorien.com

Date Published: 10/16/2021

View: 5720

PROTEK SRS Drill INTERRUPTER

What the PROTEK SRS does — The PROTEK SRS Drill Interrupter is designed to stop power to a drill upon contact between the drill bit and grounded metal …

+ 여기에 자세히 보기

Source: silo.tips

Date Published: 10/1/2022

View: 2048

PROTEK SRS Drill INTERRUPTER – PDF Free Download

Instantly, when the drill bit closes this control loop by contacting grounded metal, relays in the PROTEK SRS trip – shutting off power to the drill and …

+ 자세한 내용은 여기를 클릭하십시오

Source: docplayer.net

Date Published: 6/5/2021

View: 7067

Protek II Tool Interrupter – Amazon.com

Protek II Tool Interrupter Prevent damage to grounded metal pipes, conduit and rebar while drilling for termite work Heavy duty construction 1 year …

+ 여기를 클릭

Source: www.amazon.com

Date Published: 1/23/2022

View: 7249

Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded …

LORIEN INSTRUMENTS PROTEK SRS Drill Interrupter V1.3 Grounded Metal Detector – $199.99. FOR SALE! Jack Wilkerson Industrial Surplus, LLC.

+ 여기를 클릭

Source: picclick.com

Date Published: 2/7/2022

View: 1591

Protek SRS Tool Interrupter – SPW Industrial

Protek SRS Tool Interrupter. (No reviews yet) Write a Review … PROTEK SRS. Country/Region of Manufacture: United States, Model: Drill interrupter …

+ 여기에 더 보기

Source: spwindustrial.com

Date Published: 11/4/2021

View: 6024

Lorien Protek SRS v1.3 Drill Interrupter, 15 Amp, 50/60 Hz …

Buy Lorien Protek SRS v1.3 Drill Interrupter, 15 Amp, 50/60 Hz, 110-120V from Steven Levy Enterprise. Request a quote online today.

+ 여기에 표시

Source: www.slevysurplus.com

Date Published: 2/7/2022

View: 2803

주제와 관련된 이미지 protek srs drill interrupter

주제와 관련된 더 많은 사진을 참조하십시오 Learn About the Protek II Tool Interrupter. 댓글에서 더 많은 관련 이미지를 보거나 필요한 경우 더 많은 관련 기사를 볼 수 있습니다.

Learn About the Protek II Tool Interrupter
Learn About the Protek II Tool Interrupter

주제에 대한 기사 평가 protek srs drill interrupter

  • Author: Andrew Greess
  • Views: 조회수 1,092회
  • Likes: 좋아요 5개
  • Date Published: 2016. 5. 31.
  • Video Url link: https://www.youtube.com/watch?v=gLTw21k3tcw

LorienMakers of PROTEK drill interrupters – Protection against damaging grounded metal pipes, conduit, and reinforcement steel while drilling concrete walls and slabs.

The rugged PROTEK SRS Drill Interrupter offers excellent protection against drilling through grounded metal piping, grounded conduit, grounded post-tension cabling, and grounded reinforcement steel while penetrating concrete walls and slabs. The PROTEK SRS has been designed for use in nuclear facilities, power plants, construction projects, facility maintenance, and industrial applications.

Interrupts power to a drill instantly when the drill bit encounters grounded metal

Reduces damage to grounded metal: piping, conduit, grounded PT cabling, grounded rebar

High-capacity, heavy duty components

Reduces drill-bit breakage

Reliable switching. Stops power to the drill within milliseconds.

Rugged / weather-resistant, fiber-reinforced polyester housing

Active and passive safety-shunts

Heavy-duty external grounding terminals

Built-in Ground Fault Circuit Interrupter for excellent operator safety

Dust-proof / Weather-resistant GFCI – reduces exposure to drilling dust

Heavy-duty hardware, rugged design

Rated at 15 amps 110-120 Volts, AC

Each unit thoroughly tested and inspected before shipment

One full year factory warranty

For use with 3-wire grounded drills

A partial list of current users includes:

Georgia Power / Vogtle Nuclear

DOE Savannah River

Point Beach Nuclear

St. Lucie Nuclear

TVA Watts Bar Nuclear

Features

Heavy-duty, weather-resistant reinforced-polyester housing

Active and passive safety shunts

Heavy-duty, chrome-plated handle handle

Redundant external grounding/drill case terminals

Durable 12-guage NEMA 5-15 SJOW powercord

Built-in ground-indicator lamp

Dust proof/water resistant GFCI membrane

Extra-heavy-duty circuitry

Rated at 15 amps, 115 volts, AC

Partial list of Protek SRS distributors:

AMECO

Choctaw Kaul

Fastenal

Frank’s Supply

GexPro

HD Supply / WhiteCap

JETA Corp

Penn Tool

Quality Equipment

Ram Tool

Tool Smith Co.

WESCO Distribution

Details

Dimensions: 6″ x 6″ x 3.5″ (Approximate)

Weight: 8 pounds

*To see the schematic – click on the small thumbnail below the main image.

Instructions: Protek SRS Instructions PDF

[PDF] PROTEK SRS Drill INTERRUPTER

PROTEK SRS Drill INTERRUPTER

DOWNLOAD PDF (306.4KB)

Short Description

Description

PROTEK SRS Drill INTERRUPTER Section I — General Information What the PROTEK SRS does — The PROTEK SRS Drill Interrupter is designed to stop power to a drill upon contact between the drill bit and grounded metal piping, conduit, or reinforcement steel – helping the operator avoid drilling through the grounded metal object. Requirements — The PROTEK SRS operates on 110-120 volts, 60 Hertz AC, and requires a grounded wall outlet. The drill must be a three-wire grounded drill or be modified with an external ground wire. All extension cords must be threewire, grounded cords. How it works — The PROTEK SRS relies on a current loop (control loop) involving the grounding system in the PROTEK, the drill, the building electrical ground system, the wall outlet, and any extension cords used. The PROTEK SRS places a small (12 volt AC) electrical potential on the ground wire of the drill’s power cord, drill frame, and drill bit. When the drill bit contacts grounded metal, such as a section of conduit, the control current travels through the conduit, through the building’s ground system, through the ground buss of the electrical breaker panel, and back to the PROTEK. Instantly, when the drill bit closes this control loop by contacting grounded metal, relays in the PROTEK SRS trip – shutting off power to the drill and shunting drill bit current to ground. ∗∗∗ Please see Control Loop drawing ∗∗∗ If any part of the control loop is missing, intermittent, or improperly connected, the PROTEK SRS cannot stop the drill when the pipe or conduit is encountered. Examples of factors which would disrupt the control loop include: – The wall outlet is not grounded. – An extension cord with a broken or missing ground wire is used. – The metal object encountered by the bit is not grounded. Metal desks, some above-ground piping, steel reinforcement rods which are ‘floating’ in the concrete, some metal ductwork, and old corroded piping with poor electrical conductivity properties are all examples of metal objects which might not be electrically grounded. – The drill is a two-wire, double-insulated drill. – The ground wire in a three-wire, grounded drill is broken or intermittent. – The ground wire in the PROTEK SRS is broken.

What the PROTEK SRS cannot do — The PROTEK SRS cannot guarantee that a drill bit will not penetrate a metal pipe, conduit, or reinforcement rod. The PROTEK SRS can, and does, help a drill operator avoid drilling through most grounded metal objects. Experience has shown that the proper use of a PROTEK SRS is effective in reducing damage to metal pipes and conduit in the vast majority of situations in which rotary-hammer drills are utilized. Due to the extreme variability in building design, however, the PROTEK SRS should only be considered as an aid to drill operators to help avoid drilling through grounded metal piping, conduit, and reinforcement steel. All normal precautions should be taken – including the use of building plans, estimation of piping and conduit routing, and the use of the PROTEK SRS – to help reduce the possibility of pipe or conduit breakage while drilling. Factors which can contribute to the failure of a properly-used PROTEK SRS to stop a drill in time to avoid damaging a pipe include the drill bit encountering old, corroded piping; very thin-walled copper tubing; poorly installed pipe fittings; or non-standard piping installations. Shock protection — The PROTEK SRS utilizes a built-in “ground-fault-interrupter (GFCI)” to offer the drill operator an extra measure of shock protection. The GFCI shock protection circuitry works independently from the PROTEK SRS pipe protection circuitry. There are two different ways in which the PROTEK SRS can “trip”. When grounded metal is encountered, the PROTEK SRS pipe protection circuitry “trips”. When a shock hazard exists, the GFCI shock protection circuitry “trips”. The PROTEK SRS pipe protection circuitry is reset by depressing the gray “Restore Power” button. The GFCI shock protection circuitry is reset by depressing the “Reset” button on the GFCI outlet. The GFCI shock protection circuitry helps protect the tool operator against “line-toground” faults only, such as when a drill short-circuits to its case or when a drill’s power cord short-circuits. The GFCI cannot protect the operator from drilling directly into a “hot” electrical wire. Testing the PROTEK SRS — The PROTEK SRS should be tested each and every time it is used by plugging the PROTEK SRS into the wall outlet or extension cord, and plugging the drill into the PROTEK SRS. If both indicator lights are “on”, touch the drill bit to a grounded metal water pipe or conduit. The unit should trip, and power should to the drill should be interrupted.

SECTION II – NORMAL

PROTEK SRS OPERATION

1)

Plug the 3-wire, grounded drill into the PROTEK.

2)

If redundant grounding is desired, attach a 12 ga. or larger wire between the Drill-Case Ground Terminal and a grounding post or grounded case screw on the drill. Connect the “Earth Ground” terminal to the building’s grounding system.

3)

Plug the PROTEK into a 3-wire, grounded, 117 volt AC wall outlet or extension cord.

4)

Initialize the trip-protection circuit by depressing the “Restore Power” button.

5)

If the GFCI is tripped, depress the “Reset” button on the GFCI. Note: the Protek must be plugged-in to an energized wall outlet or extension cord before a tripped GFCI can be reset.

7)

Both the “Ground Indicator Lamp” and the “Ready Lamp” should be lit. If the “Ground Indicator” lamp is not lit, check the connection to building ground.

8)

The PROTEK SRS should trip instantly when the drill bit touches grounded metal. Restore power to the drill by depressing the gray “Restore Power” button.

SECTION III – Ground Indicator Lamp does not light If the “Ground Indicator Lamp” will not light, it typically means that the PROTEK SRS is not properly grounded. This is usually caused by one of the following: 1)

Broken or missing ground wire between the PROTEK SRS and the wall outlet. The PROTEK SRS power cord, extension cord, and the wall outlet all must have good ground wires and plugs. The “Earth Ground” terminal should be connected to an effective grounding source, such as an unpainted metal water pipe or section of properly-installed metal conduit.

2)

No power at the outlet. Plug the tool directly into the outlet to see if there is power to the outlet.

3)

Broken PROTEK SRS. Recheck steps 1 and 2. If unit fails to work properly, return to factory for repair.

SECTION IV — PROTEK

SRS fails to trip properly

If both indicator lights are on and the PROTEK SRS fails to trip properly during testing, try the following: 1)

Depress the “Restore Power” button.

2)

Depress the “Reset” button on the GFCI outlet.

3)

Check for a broken ground wire in the drill’s power cord, or for an improper or ineffective drill-case-ground connection. If this part of the control loop is broken or missing, the PROTEK SRS will not trip.

4)

Be certain that the metal which the bit encounters is grounded. Many metal desks, workbenches, door frames, and other above-ground metal objects are not electrically grounded.

5)

Broken PROTEK SRS. Return to factory for repair.

Special Situations Moist earth is an excellent conductor of electricity. Occasionally, while drilling a slab, the PROTEK SRS may trip after going through the bottom of a hole. If the unit trips before the hole is completed, it usually means one of two things: the bit has touched a grounded metal object, or the bit has encountered moisture. If the operator is certain that the PROTEK has tripped due to moist earth, the operator may have the option, depending upon facility protocol, of bypassing the PROTEK by plugging the drill directly into the extension cord and completing the hole. When using the PROTEK with a core drill, contact between nearby grounded metal surfaces and the water which is used to lubricate or cool the core bit may cause the PROTEK to trip without the core bit encountering grounded metal directly. The PROTEK SRS was originally designed to stop power to a drill upon bit contact with grounded metal such as conduit, water pipes, and rebar. In theory, the SRS should stop power to a drill upon bit contact with grounded metal post-tensioned cabling. As of this time, Lorien Instruments has not conducted definitive testing of the PROTEK SRS on grounded post-tensioned cable systems and makes no claim of suitability for that purpose. Occasionally, when soft copper pipe or old, corroded pipe is encountered, the momentum of the drill bit will allow it to penetrate the pipe wall even though power to the drill has been interrupted. While this is a rare event, this possibility always exists. The PROTEK cannot guarantee that pipes will not be broken. It can and does help prevent broken pipes.

Current Rating — The maximum current load of a power tool used with the PROTEK SRS should not exceed 15 amps. When operated with 12 gauge or larger grounding jumpers, the minimum continuous shunt-current rating of the PROTEK SRS is 20 amps.

Caution —

Always wear gloves when operating the PROTEK drill interrupter. A slight, low-voltage shock may be felt from the drill bit, the drill case, the “Drill Case Ground” terminal, or exposed metal surfaces on the GFCI cover when handled without gloves. This 12 volt AC, low-current condition is caused by the PROTEK’s control circuit and is not harmful to a normally healthy person.

Note — Depressing the GFCI test button excessively may shorten the lifespan of this component. Lorien Instruments recommends testing the GFCI on a daily basis.

Warranty — Each PROTEK SRS is thoroughly tested and inspected at the factory prior to shipment. Lorien Instruments, Inc. offers a one year warranty on parts and labor on each PROTEK SRS and will repair any defective PROTEK SRS at its Texas manufacturing facility free of charge with proof of purchase within one year of the date of purchase. Negligence or abuse of a PROTEK SRS will void the warranty.

Repair instructions — All PROTEK units are repaired at Lorien’s main facility in Texas. Ship the broken unit, along with a contact name, your return billing address, your return shipping address (not a P.O. Box), and telephone number to: Lorien Instruments, Inc. Attn: Repair Department 101 County Road 492 Muenster, Texas 76252 (940) 759-2525

FOR FURTHER ASSISTANCE – CALL OR WRITE: Lorien Instruments, Inc. P.O. Box 605 Muenster, TX 76252 (940) 759-2525 (888) 658-8030 Toll Free www.lorien.com © 2007 Lorien Instruments, Inc.

Comments

1 PROTEK SRS Drill INTERRUPTER Section I — General Information What the PROTEK SRS does — The PROTEK SRS Drill Interru…

PROTEK SRS Drill INTERRUPTER

Transcription

1 PROTEK SRS Drill INTERRUPTER Section I — General Information What the PROTEK SRS does — The PROTEK SRS Drill Interrupter is designed to stop power to a drill upon contact between the drill bit and grounded metal piping, conduit, or reinforcement steel – helping the operator avoid drilling through the grounded metal object. Requirements — The PROTEK SRS operates on volts, 60 Hertz AC, and requires a grounded wall outlet. The drill must be a three-wire grounded drill or be modified with an external ground wire. All extension cords must be threewire, grounded cords. How it works — The PROTEK SRS relies on a current loop (control loop) involving the grounding system in the PROTEK, the drill, the building electrical ground system, the wall outlet, and any extension cords used. The PROTEK SRS places a small (12 volt AC) electrical potential on the ground wire of the drill s power cord, drill frame, and drill bit. When the drill bit contacts grounded metal, such as a section of conduit, the control current travels through the conduit, through the building’s ground system, through the ground buss of the electrical breaker panel, and back to the PROTEK. Instantly, when the drill bit closes this control loop by contacting grounded metal, relays in the PROTEK SRS trip – shutting off power to the drill and shunting drill bit current to ground. Please see Control Loop drawing If any part of the control loop is missing, intermittent, or improperly connected, the PROTEK SRS cannot stop the drill when the pipe or conduit is encountered. Examples of factors which would disrupt the control loop include: – The wall outlet is not grounded. – An extension cord with a broken or missing ground wire is used. – The metal object encountered by the bit is not grounded. Metal desks, some above-ground piping, steel reinforcement rods which are floating in the concrete, some metal ductwork, and old corroded piping with poor electrical conductivity properties are all examples of metal objects which might not be electrically grounded. – The drill is a two-wire, double-insulated drill. – The ground wire in a three-wire, grounded drill is broken or intermittent. – The ground wire in the PROTEK SRS is broken.

2

3 What the PROTEK SRS cannot do — The PROTEK SRS cannot guarantee that a drill bit will not penetrate a metal pipe, conduit, or reinforcement rod. The PROTEK SRS can, and does, help a drill operator avoid drilling through most grounded metal objects. Experience has shown that the proper use of a PROTEK SRS is effective in reducing damage to metal pipes and conduit in the vast majority of situations in which rotary-hammer drills are utilized. Due to the extreme variability in building design, however, the PROTEK SRS should only be considered as an aid to drill operators to help avoid drilling through grounded metal piping, conduit, and reinforcement steel. All normal precautions should be taken – including the use of building plans, estimation of piping and conduit routing, and the use of the PROTEK SRS – to help reduce the possibility of pipe or conduit breakage while drilling. Factors which can contribute to the failure of a properly-used PROTEK SRS to stop a drill in time to avoid damaging a pipe include the drill bit encountering old, corroded piping; very thin-walled copper tubing; poorly installed pipe fittings; or non-standard piping installations. Shock protection — The PROTEK SRS utilizes a built-in “ground-fault-interrupter (GFCI)” to offer the drill operator an extra measure of shock protection. The GFCI shock protection circuitry works independently from the PROTEK SRS pipe protection circuitry. There are two different ways in which the PROTEK SRS can “trip”. When grounded metal is encountered, the PROTEK SRS pipe protection circuitry “trips”. When a shock hazard exists, the GFCI shock protection circuitry “trips”. The PROTEK SRS pipe protection circuitry is reset by depressing the gray “Restore Power” button. The GFCI shock protection circuitry is reset by depressing the “Reset” button on the GFCI outlet. The GFCI shock protection circuitry helps protect the tool operator against “line-toground” faults only, such as when a drill short-circuits to its case or when a drill’s power cord short-circuits. The GFCI cannot protect the operator from drilling directly into a “hot” electrical wire. Testing the PROTEK SRS — The PROTEK SRS should be tested each and every time it is used by plugging the PROTEK SRS into the wall outlet or extension cord, and plugging the drill into the PROTEK SRS. If both indicator lights are “on”, touch the drill bit to a grounded metal water pipe or conduit. The unit should trip, and power should to the drill should be interrupted.

4

5 SECTION II – NORMAL PROTEK SRS OPERATION 1) Plug the 3-wire, grounded drill into the PROTEK. 2) If redundant grounding is desired, attach a 12 ga. or larger wire between the Drill-Case Ground Terminal and a grounding post or grounded case screw on the drill. Connect the “Earth Ground” terminal to the building’s grounding system. 3) Plug the PROTEK into a 3-wire, grounded, 117 volt AC wall outlet or extension cord. 4) Initialize the trip-protection circuit by depressing the “Restore Power” button. 5) If the GFCI is tripped, depress the “Reset” button on the GFCI. Note: the Protek must be plugged-in to an energized wall outlet or extension cord before a tripped GFCI can be reset. 7) Both the “Ground Indicator Lamp” and the “Ready Lamp” should be lit. If the “Ground Indicator” lamp is not lit, check the connection to building ground. 8) The PROTEK SRS should trip instantly when the drill bit touches grounded metal. Restore power to the drill by depressing the gray “Restore Power” button. SECTION III – Ground Indicator Lamp does not light If the “Ground Indicator Lamp” will not light, it typically means that the PROTEK SRS is not properly grounded. This is usually caused by one of the following: 1) Broken or missing ground wire between the PROTEK SRS and the wall outlet. The PROTEK SRS power cord, extension cord, and the wall outlet all must have good ground wires and plugs. The “Earth Ground” terminal should be connected to an effective grounding source, such as an unpainted metal water pipe or section of properly-installed metal conduit. 2) No power at the outlet. Plug the tool directly into the outlet to see if there is power to the outlet. 3) Broken PROTEK SRS. Recheck steps 1 and 2. If unit fails to work properly, return to factory for repair.

6 SECTION IV — PROTEK SRS fails to trip properly If both indicator lights are on and the PROTEK SRS fails to trip properly during testing, try the following: 1) Depress the “Restore Power” button. 2) Depress the “Reset” button on the GFCI outlet. 3) Check for a broken ground wire in the drill’s power cord, or for an improper or ineffective drill-case-ground connection. If this part of the control loop is broken or missing, the PROTEK SRS will not trip. 4) Be certain that the metal which the bit encounters is grounded. Many metal desks, workbenches, door frames, and other above-ground metal objects are not electrically grounded. 5) Broken PROTEK SRS. Return to factory for repair. Special Situations Moist earth is an excellent conductor of electricity. Occasionally, while drilling a slab, the PROTEK SRS may trip after going through the bottom of a hole. If the unit trips before the hole is completed, it usually means one of two things: the bit has touched a grounded metal object, or the bit has encountered moisture. If the operator is certain that the PROTEK has tripped due to moist earth, the operator may have the option, depending upon facility protocol, of bypassing the PROTEK by plugging the drill directly into the extension cord and completing the hole. When using the PROTEK with a core drill, contact between nearby grounded metal surfaces and the water which is used to lubricate or cool the core bit may cause the PROTEK to trip without the core bit encountering grounded metal directly. The PROTEK SRS was originally designed to stop power to a drill upon bit contact with grounded metal such as conduit, water pipes, and rebar. In theory, the SRS should stop power to a drill upon bit contact with grounded metal post-tensioned cabling. As of this time, Lorien Instruments has not conducted definitive testing of the PROTEK SRS on grounded post-tensioned cable systems and makes no claim of suitability for that purpose. Occasionally, when soft copper pipe or old, corroded pipe is encountered, the momentum of the drill bit will allow it to penetrate the pipe wall even though power to the drill has been interrupted. While this is a rare event, this possibility always exists. The PROTEK cannot guarantee that pipes will not be broken. It can and does help prevent broken pipes.

7 Current Rating — The maximum current load of a power tool used with the PROTEK SRS should not exceed 15 amps. When operated with 12 gauge or larger grounding jumpers, the minimum continuous shunt-current rating of the PROTEK SRS is 20 amps. Caution — Always wear gloves when operating the PROTEK drill interrupter. A slight, low-voltage shock may be felt from the drill bit, the drill case, the “Drill Case Ground” terminal, or exposed metal surfaces on the GFCI cover when handled without gloves. This 12 volt AC, low-current condition is caused by the PROTEK’s control circuit and is not harmful to a normally healthy person. Note — Depressing the GFCI test button excessively may shorten the lifespan of this component. Lorien Instruments recommends testing the GFCI on a daily basis. Warranty — Each PROTEK SRS is thoroughly tested and inspected at the factory prior to shipment. Lorien Instruments, Inc. offers a one year warranty on parts and labor on each PROTEK SRS and will repair any defective PROTEK SRS at its Texas manufacturing facility free of charge with proof of purchase within one year of the date of purchase. Negligence or abuse of a PROTEK SRS will void the warranty. Repair instructions — All PROTEK units are repaired at Lorien’s main facility in Texas. Ship the broken unit, along with a contact name, your return billing address, your return shipping address (not a P.O. Box), and telephone number to: Lorien Instruments, Inc. Attn: Repair Department 101 County Road 492 Muenster, Texas (940) FOR FURTHER ASSISTANCE – CALL OR WRITE: Lorien Instruments, Inc. P.O. Box 605 Muenster, TX (940) (888) Toll Free Lorien Instruments, Inc.

Amazon.com

Enter the characters you see below

Sorry, we just need to make sure you’re not a robot. For best results, please make sure your browser is accepting cookies.

LORIEN INSTRUMENTS PROTEK SRS Drill Interrupter V1.3 Grounded Metal Detector $199.99

Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded Metal Detector

Seller: jack.dd21 (15,771) 100%, Location: Baton Rouge, Louisiana, US, Ships to: US, Item: 331823313062 Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded Metal Detector. Jack Wilkerson Industrial Surplus, LLC.DescriptionYou are bidding on one (1) used Lorien Instruments SRS Drill Interrupter. Model: SRS V1.3. [link removed by eBay] Interrupts power to a drill instantly when the drill bit encounters grounded metalReduces damage to grounded metal: piping, conduit, PT cabling, rebarHigh-capacity, heavy duty componentsReduces drill-bit breakageUltra-reliable switching. Stops power to the drill within milliseconds.Rugged / weather-resistant, fiber-reinforced polyester housingActive and passive safety-shunt circuitsHeavy-duty external grounding terminalsBuilt-in Ground Fault Circuit Interrupter for excellent operator safetyDust-proof / Weather-resistant GFCI – withstands exposure to drilling dustHeavy-duty hardware, rugged designRated at 15 amps 110-120 Volts, ACApproved for use while on ladders and scaffoldingFor use with 3-wire grounded drillsItem is used; works fine. Shipping & Handling We ship with either USPS or FedEx Ground. Larger items are shipped via FedEx Ground. Buyer pays $0.00 shipping and handling (shipped in 48 States). We accept PayPal. We will combine shipping and reduce S&H charges in most cases.Items are usually shipped 1 business day (not including holidays and weekends) after you have paid for the item. TaxLouisiana residents will be charged a 5% sales tax.Please check out our store page to see what we have for sale http://www.ebay.com/sch/jack.dd21/m.htmlP: 423 Condition: Used, Brand: Lorien, MPN: SRS v1.3 See More

PicClick Insights – Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded Metal Detector PicClick Exclusive Popularity – 4 watchers, 0.0 new watchers per day , 392 days for sale on eBay. Very high amount watching. 5 sold, 0 available. More

– , 392 days for sale on eBay. Very high amount watching. 5 sold, 0 available. × Popularity – Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded Metal Detector 4 watchers, 0.0 new watchers per day, 392 days for sale on eBay. Very high amount watching. 5 sold, 0 available. Best Price –

– × Price – Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded Metal Detector Seller – 15,771+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings. More × Seller – Lorien Instruments Protek SRS Drill Interrupter V1.3 Grounded Metal Detector 15,771+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings. Recent Feedback

People Also Loved PicClick Exclusive

Protek SRS Tool Interrupter

MSRP: Now: $570.00 Was:

Product Specs Condition: Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Notes:

BZ2140199

Lorien Protek SRS v1.3 Drill Interrupter, 15 Amp, 50/60 Hz, 110-120V

We Buy And Sell Industrial Surplus –

Tell Us What You Have For Sale

Call Us 713-910-4337 – or Click Here To Submit

키워드에 대한 정보 protek srs drill interrupter

다음은 Bing에서 protek srs drill interrupter 주제에 대한 검색 결과입니다. 필요한 경우 더 읽을 수 있습니다.

See also  송동호 종합 로펌 | '심신 미약' 살인범 - 미국 형사법 전문 변호사, 뉴욕, 뉴저지 형사법 변호사, 정신 질환자 범죄, 중범죄 변호사, 뉴저지 형사 변호사, 뉴욕 형사 변호사 빠른 답변
See also  오이 피클 김진옥 | 마트에 오이가 보이면 무조건 사오세요❗일주일이 행복해집니다 # 쇼츠버전 29157 명이 이 답변을 좋아했습니다

See also  Rzeczoznawca Majątkowy Studia Podyplomowe Poznań | Rzeczoznawca Majątkowy – Studia Podyplomowe Na Ue Katowice 23 개의 정답

이 기사는 인터넷의 다양한 출처에서 편집되었습니다. 이 기사가 유용했기를 바랍니다. 이 기사가 유용하다고 생각되면 공유하십시오. 매우 감사합니다!

사람들이 주제에 대해 자주 검색하는 키워드 Learn About the Protek II Tool Interrupter

  • Qspray
  • Quality equipment and spray
  • termite tools
  • pest control
  • pest control equipment
  • commercial pest control equipment
  • termite treatment
  • termite control
  • protek
  • tool

Learn #About #the #Protek #II #Tool #Interrupter


YouTube에서 protek srs drill interrupter 주제의 다른 동영상 보기

주제에 대한 기사를 시청해 주셔서 감사합니다 Learn About the Protek II Tool Interrupter | protek srs drill interrupter, 이 기사가 유용하다고 생각되면 공유하십시오, 매우 감사합니다.

Leave a Comment