당신은 주제를 찾고 있습니까 “solid angle plate – Understanding the concept of Solid Angle“? 다음 카테고리의 웹사이트 https://ppa.charoenmotorcycles.com 에서 귀하의 모든 질문에 답변해 드립니다: https://ppa.charoenmotorcycles.com/blog. 바로 아래에서 답을 찾을 수 있습니다. 작성자 ENGINEERING STREAMLINED 이(가) 작성한 기사에는 조회수 19,683회 및 좋아요 548개 개의 좋아요가 있습니다.
solid angle plate 주제에 대한 동영상 보기
여기에서 이 주제에 대한 비디오를 시청하십시오. 주의 깊게 살펴보고 읽고 있는 내용에 대한 피드백을 제공하세요!
d여기에서 Understanding the concept of Solid Angle – solid angle plate 주제에 대한 세부정보를 참조하세요
In geometry, a solid angle (symbol: Ω) is a measure of the amount of the field of view from some particular point that a given object covers. That is, it is a measure of how large the object appears to an observer looking from that point. The point from which the object is viewed is called the apex of the solid angle, and the object is said to subtend its solid angle from that point.
In the International System of Units (SI), a solid angle is expressed in a dimensionless unit called a steradian (symbol: sr).
solid angle plate 주제에 대한 자세한 내용은 여기를 참조하세요.
Fuji Tool Bộ Thước Đo Góc (Solid Angle Plate)
Fuji Tool Bộ Thước Đo Góc (Sol Angle Plate) … Thước dùng để đo góc mặt đất (ground angle) chính xác giúp thuận tiện trong sử dụng công cụ, …
Source: koueitrading.com
Date Published: 6/23/2021
View: 263
주제와 관련된 이미지 solid angle plate
주제와 관련된 더 많은 사진을 참조하십시오 Understanding the concept of Solid Angle. 댓글에서 더 많은 관련 이미지를 보거나 필요한 경우 더 많은 관련 기사를 볼 수 있습니다.
주제에 대한 기사 평가 solid angle plate
- Author: ENGINEERING STREAMLINED
- Views: 조회수 19,683회
- Likes: 좋아요 548개
- Date Published: 2021. 2. 9.
- Video Url link: https://www.youtube.com/watch?v=VmnkkWLwVsc
What is angle plate used for?
Angle plates are used to hold workpieces square to the table during marking out operations. Adjustable angle plates are also available for workpieces that need to be inclined, usually towards a milling cutter.
What is a slotted angle plate used for?
These slotted angle plates are also used as a vertical reference for inspection and tooling purposes such as shaping, planning, milling, grinding, drilling etc. All 6 working faces of our angle plates are hand scrapped to desired accuracy and are square/right angle to each other.
What is an adjustable angle plate?
Here, the material to be drilled is held in position by two bolts and rests on ‘supporting’ packing (accurately cut steel). The angle plate is bolted to the table of the drilling machine. ADJUSTABLE ANGLE PLATES. Adjustable angle plates, are useful when an angle other than 90 degrees is required.
What is an angle of angle plate?
What Is Angle Plate? The angle plate is made by two plates machining at an angle of 90 degrees. Since the plates join at a particular angle, it is called an angle plate. It is used to clamp the job, supporting it at 90 degrees. The edges and ends of the angle plates are also produced at 90 degrees by machining.
Which type of angle plate is used with face plate?
1. Angle plate is a cast iron plate. Explanation: Angle plates are always used along with face plates and for its stability it is made up of iron.
How many types of angle plates are there?
From numbers 1 to 6 is 1st-grade angle plate and from 7 to 10 is 2nd-grade angle plate. grade angle plates are used in tool rooms as very accurate machining and marking can be done using 1st-grade angle plate. 2nd-grade angle plates are of less quality than 1st-grade angle plates.
Why is it called angle iron?
angle iron in American English
a piece of structural iron or steel in the form of an angle; esp., such a piece in a right angle, used for joining or reinforcing two beams, girders, etc.
What is angled metal called?
What is steel angle? Steel angle, also named angle iron, or steel angle bar, is basically manufactured by hot-rolled carbon steel or high strength low alloy steel. It has L-cross shaped section with two legs – equal or unequal and the angle would be 90 degree.
Why ribs are provided in the angle plate?
Explanation: Angle plates are made of closely grained cast iron or steel. The edges and ends are also machined square. They have ribs on the unmachined part for good rigidity and to prevent distortion.
What are the use of face plate and angle plate in a lathe?
A lathe faceplate is a basic workholding accessory for a wood or metal turning lathe. It is a circular metal (usually cast iron) plate which fixes to the end of the lathe spindle.
What is a fixture plate?
Fixture plates are also known as tooling plates or module fixture plates. They are built using aluminum, and they are used to mount parts efficiently while saving time in the manufacturing process.
What is a surface plate made of?
Today most surface plates continue to be made of black granite, more accurately referred to as black diabase, with the more wear-resistant surface plates being made of quartz-bearing granite. The quartz content of these granite surface plates increases the wear resistance of the plate as quartz is a harder stone.
Where will be using the angle plate and counter weight?
When work is mounted off – center, a counterbalance should be fastened to the faceplate to prevent imbalance and the resultant vibrations when the lathe is in operation.
Which angle plate is used to support and clamp the job?
Right Answer is: D
Angle plates have two plane surfaces, machined perfectly flat and at right angles. They have ribs on the unmachined part for good rigidity and to prevent distortion.
Where will be using the angle plate and counter weight?
When work is mounted off – center, a counterbalance should be fastened to the faceplate to prevent imbalance and the resultant vibrations when the lathe is in operation.
What are the use of face plate and angle plate in a lathe?
A lathe faceplate is a basic workholding accessory for a wood or metal turning lathe. It is a circular metal (usually cast iron) plate which fixes to the end of the lathe spindle.
Why ribs are provided in the angle plate?
Explanation: Angle plates are made of closely grained cast iron or steel. The edges and ends are also machined square. They have ribs on the unmachined part for good rigidity and to prevent distortion.
How do you take care of an angle plate?
Care and Maintenance of Angle Plate:
1) Angle Plate should be cleaned before and after its use. 2) Apply oil after using the angle plate.
SOLID ANGLE PLATE
Jig
SOLID ANGLE PLATE
Triangle gauge for interior angle use
Precisely ground angle for convenient set-ups in tooling, production and inspection.
Material Carbon Steel Hardness HRC50 ~ 55 ° Thickness 7mm Accuracy ± 0.01 ° （± 40 “） Squareness ± 0.015mm
Solid Angle Plate
An angle plate is a work holding device used as a fixture in metalworking. The angle plate is made from high quality material (cast iron) that has been stabilized to prevent further movement or distortion.
Angle plate
Adjustable angle plate
Fixed angle plate
An angle plate is a work holding device used as a fixture in metalworking.
Angle plates are used to hold workpieces square to the table during marking out operations. Adjustable angle plates are also available for workpieces that need to be inclined, usually towards a milling cutter. Angle plates are made from high quality material (generally spheroidal cast iron) that has been stabilized to prevent further movement or distortion. Slotted holes or “T” bolt slots are machined into the surfaces to enable the secure attachment or clamping of workpieces to the plate, and the plate to the worktable.
SLOTTED ANGLE PLATE
Description
PRODUCT DESCRIPTION
We manufacture and supply a wide range of slotted angle plates, which are largely used in various industries for clamping and holding work in vertical position. These slotted angle plates are also used as a vertical reference for inspection and tooling purposes such as shaping, planning, milling, grinding, drilling etc. All 6 working faces of our angle plates are hand scrapped to desired accuracy and are square/right angle to each other. Fabricated using high quality closed grain cast iron of Grade FG-220, these angle plates comply with IS 2554:1971 standards.
Features :
ANGLE PLATES
This is another example of the use of an angle plate, for clamping irregular shaped work in position.
This is an aluminium casting, that requires a hole to be drilled, through its top surface.
What Is Angle Plate? | Types of Angle Plates | Box Angle Plate of Angle Plate
What Is Angle Plate?
The angle plate is made by two plates machining at an angle of 90 degrees. Since the plates join at a particular angle, it is called an angle plate. It is used to clamp the job, supporting it at 90 degrees.
The edges and ends of the angle plates are also produced at 90 degrees by machining. The part of the angle plate that is not in the ribs of that part is made for proper grip and prevents any deformity. The ribs support two plates of the angle plate.
Angle plates are mainly made of G.C.I (Granular Cast Iron). The jobs are mounted using angle plates for both measuring and marking.
The shape of an angle plate is specified using its length, width, and height. Depending on the size of the angle plates, they are numbered from 1 to 10. Nos. 1 to 6 is the first-class angle plate, and 7 to 10 is the second class angle plate.
The 1st-grade angle plate is very well-grounded and is of high quality. 1st Grade angle plates are used in the tool room as very precise machining, and marking can be done using 1st-grade angle plates.
Second-class angle plates are of lower quality than first-class angle plates. They are used in machine shops or workshops.
Apart from the 1st-grade angle plate and 2nd-grade angle plate, a precision angle plate is also available for checkings the quality of 1st grade & 2nd-grade angle plates.
Types of Angle Plates:
#1. Plain or Solid Angle Plate
These angle plates are named plain angles plates because both plates, which are placed at 90 degrees in these angles plate, are completely plane. There are no slots on this plate. These are the most commonly used angle plates of all different types.
These plane angle plates have ribs to prevent the angle plates from becoming deformed or deformed. These angles plate are smaller in size than other angles plate.
#2. Slotted Angle Plate
Slated angles are cut slots or grooves between the plates in the plate. They are larger in size than a plain angle plate. The slots are cut into a slotted angle plate so that we can fasten a job in it using a nut and bolt. Clamping bolts are attached in slots on the top plane surface of the slotted angle plates.
The bottom side of the slotted angles plate can also be properly glued with the machine table. It is also used to fasten, support, and mark the workpiece.
For marking & machining, this type of angle plate can be rotated up to 90 degrees. This slotted angles plate can be used in lathe, shaper, grinding machines.
#3. Adjustable Angle Plate or Swivel Base Angles Plate
In this type of angle plate, angles between two plates are adjustable, i.e., we can change the angle between the two plates as per our requirements.
In this type of angle plate, the two plates are not machined with each other. They are separated from each other. One plate serves as the base, and the other plate can move and change its angle relative to the first plate. Both plates are slated in an adjustable angle plate.
One plate has graduation marking of different angles so that the tilt angle can be detected with respect to the other surface, & we can set the plates at an angle that is necessary. There are nut bolts to lock the two plates at any angle.
These angle plates are used where we have to do precise machining or machining at a specific angle other than 90 degrees.
Box Angle Plate of Angle Plate:
It is called a box angles plate because its structure is like a box. This type of angle plate consists of six plates alternately at 90 degrees. The use of a box angle plate is similar to the use of angle plates indicated above.
There are slots in each of the six plates on this angle plate. Since there are slots on each side, the job can be properly fastened on either side using a nut and bolt.
After camping or setting the workpiece or job, the job can be rotated with a box angle plate, i.e., we can easily rotate the box to change the orientation of the job for various operations like drilling, marking, etc. This is a very useful feature—this box angle plate makes various processes very easy.
All the planes in this box angle plate are joined by machining them at 90 degrees so that the angle has precision. Box angle plates are used in large machines such as radial drilling machines for clamping workpieces.
Swivel Angle Plates of Angle Plate:
Swivel angle plates ensure that work can be set quickly and correctly at any angle with these adjustable swivel angle plates. They are graduated to set 0 – 90 ° and can be easily adjusted manually and locked to the adjusted position via two locking nuts. To establish the objectives, a degree scale, a minimum of one-degree reading, is graduated on the boss itself. This ensures better setting accuracy.
Swivel angles plates are offered in the following sizes: Tilting angle (0 ° -90º)
Cast Iron T-Slotted Angle Plate of Angle Plate:
Cast iron T-slated angle plates are being used for various jobs in various industries such as vertical mounting of large jobs, while used as precise vertical bases for machining, marking, inspection, fabrication, other Accuracy of surfaces, and many other types of operations.
Profile:- Generally, T-slots are provided with sizes 18, 22, 28, 36 mm, which correspond to IS: 2013 / DIN 650, ranging from H12 to H7. Hole, square slots, guiding slots, or other profiles can be given on vertical as well as bottom face as per customer requirement.
Relieve stress:- After rough machining to prevent deformation, the angle will be relieved by casting stress.
Large sizes:- Jagdeep T-slated angle plates will be manufactured in different sizes and combinations in a single piece or multi-piece construction depending on the application and requirement.
Flatness and Perpendicularity:- T-slated angle plates shall be constructed of the vertical and horizontal surface of the flat and vertical surface with the vertical-horizontal face or table face and per DIN 875.
Surface Finish:- CNC finish or hand scrap finish can be provided as per requirement.
Care and Maintenance of Angle Plate:
Angle Plate should be cleaned before & after its use.
Apply oil after using the angle plate.
Frequently Asked Questions (FAQ)
Milling Machine Angle Plate
Milling Machine Angle Plate This configuration allows, in theory, for the user to use a horizontal milling machine as a vertical milling machine. But it’s easy to see that it’s very difficult for the user to see what’s going on.
The workpiece is also difficult to install, not only because it is inaccessible but because the surface is perpendicular. The way only to do this is to remove the angle plate from the machine, fit it into a vice and mount the workpiece horizontally with the surface.
Large Angle Plate
Large angle plates (individual/stacked) provide a practical means for clamping and holding work in a vertical position for layout, tooling and machining. Angle plates are also used as vertical references for inspection.
90 Degree Angle Plate
Angle Plates with Mounting Slots. Use these plates to ensure accurate right angles and hold workpieces and fixtures perpendicular to a machine table.
Angle plates
Machined angle plates are used for general machine shop and set-up work. Cast iron, also known as semi-steel, extremely strong angle plates provides a practical means for clamping and holding work in a vertical position for layout, tooling and machining.
Milling Angle Plate
An angle plate is simply a piece of cast iron or steel with two flat surfaces at right angles to each other. The two ends of the angle plate are also plane and are at right angles to the other two surfaces. On some angle plates, there may be webbing between the two surfaces to add to the rigidity of the surfaces.
Cast Iron Angle Plate
Shop Shars Tool today and experience our high-quality angle plate at a great value, same-day shipping and dedicated customer support.
Precision Angle Plate
Complete line of machinery flat and square adjustable angle plates, box parallel, compound, cube and stepped precision angle plates, sign plates with angular accuracy and minute steps, open and webbed and slotted angle plates with clamping slots for easy mounting of workpieces provides. And ground and machined universal angle plates from brands KBC and Suburban Tool.
Slotted Angle Plates
This Slotted Angle Plate features a triangular gusset web design for strength and perfectly machined square faces, and parallel outside edges and ends.
Tilting Angle Plate
This accessory offers a variety of setup options. From base mounted square to mill table, slanted table-mounted parts can be machined or drilled at precise angles. This can be set to any angle from 0° to 90°. The hole pattern in the table accepts Sherlyn’s mill vice and rotary table.
Adjustable Angle Plate for Milling Machine
Adjustable Milling Table This tilting table for the milling machine, which is made of heavy-duty cast iron, can be rotated from 0-45 degrees (both sides) with 3 T-slots (12 mm） a crank handle, and a precision ground finish.
With can be adjusted. The perfect tool to improve your milling processing. For angle setting on various machine tools. Adjustable 45º, Material: FC25, Lower plate, and bigger working space.
Amazon.com
Enter the characters you see below
Sorry, we just need to make sure you’re not a robot. For best results, please make sure your browser is accepting cookies.
Solid Angle Plate Set
JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.
Solid Angle Plates
About the Company
Year of Establishment 1980 Legal Status of Firm Partnership Firm Nature of Business Manufacturer Number of Employees 26 to 50 People Annual Turnover Rs. 5 – 10 Crore IndiaMART Member Since Mar 2015 GST 07AAPFA8804R1ZO Import Export Code (IEC) 05090***** Exports to Zambia, Singapore
Atech Tools is providing Cutting Tools, Hand Tools, Machine Tools and Magnetic And Dressing. Our claim to success is hallmarked by the offered quality products that gained us huge recognizance. We are working towards development through a determined team of people to meet the most stringent requirements of customers and become leaders of tomorrow.
Company Video
What Is Angle Plate? | Types of Angle Plates | Box Angle Plate of Angle Plate
What Is Angle Plate?
The angle plate is made by two plates machining at an angle of 90 degrees. Since the plates join at a particular angle, it is called an angle plate. It is used to clamp the job, supporting it at 90 degrees.
The edges and ends of the angle plates are also produced at 90 degrees by machining. The part of the angle plate that is not in the ribs of that part is made for proper grip and prevents any deformity. The ribs support two plates of the angle plate.
Angle plates are mainly made of G.C.I (Granular Cast Iron). The jobs are mounted using angle plates for both measuring and marking.
The shape of an angle plate is specified using its length, width, and height. Depending on the size of the angle plates, they are numbered from 1 to 10. Nos. 1 to 6 is the first-class angle plate, and 7 to 10 is the second class angle plate.
The 1st-grade angle plate is very well-grounded and is of high quality. 1st Grade angle plates are used in the tool room as very precise machining, and marking can be done using 1st-grade angle plates.
Second-class angle plates are of lower quality than first-class angle plates. They are used in machine shops or workshops.
Apart from the 1st-grade angle plate and 2nd-grade angle plate, a precision angle plate is also available for checkings the quality of 1st grade & 2nd-grade angle plates.
Types of Angle Plates:
#1. Plain or Solid Angle Plate
These angle plates are named plain angles plates because both plates, which are placed at 90 degrees in these angles plate, are completely plane. There are no slots on this plate. These are the most commonly used angle plates of all different types.
These plane angle plates have ribs to prevent the angle plates from becoming deformed or deformed. These angles plate are smaller in size than other angles plate.
#2. Slotted Angle Plate
Slated angles are cut slots or grooves between the plates in the plate. They are larger in size than a plain angle plate. The slots are cut into a slotted angle plate so that we can fasten a job in it using a nut and bolt. Clamping bolts are attached in slots on the top plane surface of the slotted angle plates.
The bottom side of the slotted angles plate can also be properly glued with the machine table. It is also used to fasten, support, and mark the workpiece.
For marking & machining, this type of angle plate can be rotated up to 90 degrees. This slotted angles plate can be used in lathe, shaper, grinding machines.
#3. Adjustable Angle Plate or Swivel Base Angles Plate
In this type of angle plate, angles between two plates are adjustable, i.e., we can change the angle between the two plates as per our requirements.
In this type of angle plate, the two plates are not machined with each other. They are separated from each other. One plate serves as the base, and the other plate can move and change its angle relative to the first plate. Both plates are slated in an adjustable angle plate.
One plate has graduation marking of different angles so that the tilt angle can be detected with respect to the other surface, & we can set the plates at an angle that is necessary. There are nut bolts to lock the two plates at any angle.
These angle plates are used where we have to do precise machining or machining at a specific angle other than 90 degrees.
Box Angle Plate of Angle Plate:
It is called a box angles plate because its structure is like a box. This type of angle plate consists of six plates alternately at 90 degrees. The use of a box angle plate is similar to the use of angle plates indicated above.
There are slots in each of the six plates on this angle plate. Since there are slots on each side, the job can be properly fastened on either side using a nut and bolt.
After camping or setting the workpiece or job, the job can be rotated with a box angle plate, i.e., we can easily rotate the box to change the orientation of the job for various operations like drilling, marking, etc. This is a very useful feature—this box angle plate makes various processes very easy.
All the planes in this box angle plate are joined by machining them at 90 degrees so that the angle has precision. Box angle plates are used in large machines such as radial drilling machines for clamping workpieces.
Swivel Angle Plates of Angle Plate:
Swivel angle plates ensure that work can be set quickly and correctly at any angle with these adjustable swivel angle plates. They are graduated to set 0 – 90 ° and can be easily adjusted manually and locked to the adjusted position via two locking nuts. To establish the objectives, a degree scale, a minimum of one-degree reading, is graduated on the boss itself. This ensures better setting accuracy.
Swivel angles plates are offered in the following sizes: Tilting angle (0 ° -90º)
Cast Iron T-Slotted Angle Plate of Angle Plate:
Cast iron T-slated angle plates are being used for various jobs in various industries such as vertical mounting of large jobs, while used as precise vertical bases for machining, marking, inspection, fabrication, other Accuracy of surfaces, and many other types of operations.
Profile:- Generally, T-slots are provided with sizes 18, 22, 28, 36 mm, which correspond to IS: 2013 / DIN 650, ranging from H12 to H7. Hole, square slots, guiding slots, or other profiles can be given on vertical as well as bottom face as per customer requirement.
Relieve stress:- After rough machining to prevent deformation, the angle will be relieved by casting stress.
Large sizes:- Jagdeep T-slated angle plates will be manufactured in different sizes and combinations in a single piece or multi-piece construction depending on the application and requirement.
Flatness and Perpendicularity:- T-slated angle plates shall be constructed of the vertical and horizontal surface of the flat and vertical surface with the vertical-horizontal face or table face and per DIN 875.
Surface Finish:- CNC finish or hand scrap finish can be provided as per requirement.
Care and Maintenance of Angle Plate:
Angle Plate should be cleaned before & after its use.
Apply oil after using the angle plate.
Frequently Asked Questions (FAQ)
Milling Machine Angle Plate
Milling Machine Angle Plate This configuration allows, in theory, for the user to use a horizontal milling machine as a vertical milling machine. But it’s easy to see that it’s very difficult for the user to see what’s going on.
The workpiece is also difficult to install, not only because it is inaccessible but because the surface is perpendicular. The way only to do this is to remove the angle plate from the machine, fit it into a vice and mount the workpiece horizontally with the surface.
Large Angle Plate
Large angle plates (individual/stacked) provide a practical means for clamping and holding work in a vertical position for layout, tooling and machining. Angle plates are also used as vertical references for inspection.
90 Degree Angle Plate
Angle Plates with Mounting Slots. Use these plates to ensure accurate right angles and hold workpieces and fixtures perpendicular to a machine table.
Angle plates
Machined angle plates are used for general machine shop and set-up work. Cast iron, also known as semi-steel, extremely strong angle plates provides a practical means for clamping and holding work in a vertical position for layout, tooling and machining.
Milling Angle Plate
An angle plate is simply a piece of cast iron or steel with two flat surfaces at right angles to each other. The two ends of the angle plate are also plane and are at right angles to the other two surfaces. On some angle plates, there may be webbing between the two surfaces to add to the rigidity of the surfaces.
Cast Iron Angle Plate
Shop Shars Tool today and experience our high-quality angle plate at a great value, same-day shipping and dedicated customer support.
Precision Angle Plate
Complete line of machinery flat and square adjustable angle plates, box parallel, compound, cube and stepped precision angle plates, sign plates with angular accuracy and minute steps, open and webbed and slotted angle plates with clamping slots for easy mounting of workpieces provides. And ground and machined universal angle plates from brands KBC and Suburban Tool.
Slotted Angle Plates
This Slotted Angle Plate features a triangular gusset web design for strength and perfectly machined square faces, and parallel outside edges and ends.
Tilting Angle Plate
This accessory offers a variety of setup options. From base mounted square to mill table, slanted table-mounted parts can be machined or drilled at precise angles. This can be set to any angle from 0° to 90°. The hole pattern in the table accepts Sherlyn’s mill vice and rotary table.
Adjustable Angle Plate for Milling Machine
Adjustable Milling Table This tilting table for the milling machine, which is made of heavy-duty cast iron, can be rotated from 0-45 degrees (both sides) with 3 T-slots (12 mm） a crank handle, and a precision ground finish.
With can be adjusted. The perfect tool to improve your milling processing. For angle setting on various machine tools. Adjustable 45º, Material: FC25, Lower plate, and bigger working space.
키워드에 대한 정보 solid angle plate
다음은 Bing에서 solid angle plate 주제에 대한 검색 결과입니다. 필요한 경우 더 읽을 수 있습니다.
이 기사는 인터넷의 다양한 출처에서 편집되었습니다. 이 기사가 유용했기를 바랍니다. 이 기사가 유용하다고 생각되면 공유하십시오. 매우 감사합니다!
사람들이 주제에 대해 자주 검색하는 키워드 Understanding the concept of Solid Angle
- Solid Angle
- Thermal Radiation
- Concept of Solid Angle
- Angle
- Planar Angle
- Solid Angle Derivation
- solid angle class 11 physics
- angle solide
- what is solid angle
- solid angle in radiation heat transfer
- solid angle in hindi
- solid angle class 12 physics
- solid angle unit
- solid angle gauss law
- steradian
- steradian in physics
- Intensity of radiation and solid angle
- Radiant Flux
- Solid Angle Derivation & Intuition
- Solid Angle derivation
Understanding #the #concept #of #Solid #Angle
YouTube에서 solid angle plate 주제의 다른 동영상 보기
주제에 대한 기사를 시청해 주셔서 감사합니다 Understanding the concept of Solid Angle | solid angle plate, 이 기사가 유용하다고 생각되면 공유하십시오, 매우 감사합니다.
